Dedicated to the preservation, restoration, and enjoyment of all Rootes Group Vehicles
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 
Chris,
I would take it to a shop that has a press, so you can do it easily without putting pressure on the impeller, which would deform it. Also, I think it would be easier to move it the desired amount and not too far. The hub is pressed on to the shaft already, so you don’t have to worry that it has frozen in place.
Jose 🙂
