I just did some wrinkle painting today. Came out great. Eric is correct. You need warm parts. Also, and this is most important. at normal room ambient t conditions, allow about 5 to 10 minutes between heavy coats. AND each coating must be heavy. Almost to the point of running on vertical surfaces. The delay time is critical. as it is the shrinkage during the curing process between layers that makes the wrinkles.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 