Hi Robert
I have had good luck with wrinkle paint by preheating the part with a heat gun or just lay it out in the sun until it is hot. Then put the paint on thick and it usually takes two coats. Then place back out in hot sun or in the wife’s oven if you can get away with that and set the oven for about 150 degrees or so-leave oven door propped open so fumes don’t accumulate. The heat will really make the wrinkle come out good. Did I mention it is probably best if your wife is not at home when you do this? Good luck and let us know how it turns out!
Eric
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 