I put the seal on the glass and then laid the whole assembly on the frame, centered it up and started on one corner with a small screwdriver working the rubber lip onto the windshield frame all the way around. That worked pretty well. Putting all the trim back on was the hardest part! I did not use any sealant. Eric
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 