Reply To: volvo 4 piston brake calipers

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

September 26, 2005 at 3:09 am #59756

James & Susan Ellis

Fred,
I do not have the part number but these NABCO master cylinders were used on lots of imports so should be simple to figure out, I will work it.

The fit to the hole in the firewall is good, the rod that came with the unit I have is adjustable and should work with no problem. Think it would not clear the rear carb on a stock Alpine cannot say how it would do on a Tiger.

I have not got to the point of installing this M/C yet so can only tell what I think not what I have done on this. May or may not be willing to write this up will think about it when I see how it goes would also like to check and see if it will clear or not on a stock engine car.