Reply To: volvo 4 piston brake calipers

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

September 22, 2005 at 3:06 am #59727

James & Susan Ellis

You could be right on the hole moving but being it is only 1/8th inch it could work. I am still looking for a set to try this on my S3.

On the Outlaw calipers… ummm I just happen to know a little something about those…

have a set on my SV V6 project what I can tell you is they bolt on will require some work for the line to fit up and have only a very little bit large piston area than the stock caliper but they do weight much less. The car is not driving yet so I cannot say how much if any they improve braking. I found a somewhat local speed shop who ordered them for me and drop shipped them from Outlaw. The calipers were somewhere north of $400 with pads and shipping, they are very slick looking by the way.