The 1592 had the spin on bolted directly to the filter mount flat on the block. The later 1725 had a block to divert to the oil cooler and back to the filter in between the two. That accounts for the difference in the passageways. But each piece was connected to the others with just a gasket in between.
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.