July 18, 2005 at 2:47 am
#59497
K & L Plating:
http://www.platinginpa.com
(717) 397-9819
One additional fact regarding removal of chrome and nickel. I started with a very rough 36-40 grit on an angle grinder for the initial removal. You must be extra careful though to not remove too much. On another note, I have a relative that works at a cycle shop here in PA. They may promise you a quick turnaround but then sit on your parts for what seems like forever. Also, many of the shops don’t have tanks large enough for bumpers.