Reply To: Block interchange/modification questions.

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

July 8, 2005 at 8:28 pm #59464

tiger331

Yes, I have a 331 Stroker in my Tiger 🙂

I took a 5.0 HO Rollerblock.

You need one of the following bellhousings :
C5DA-6394-A
D20A-6394-AA
D5DA-6394-AB

To fix you gearbox you must put a ring with outside 4 7/8″ and inside
4 11/16″ to get the gearbox in the centre.

I have bought a complete 331 Strokerkit from DSS-Racing, allready balanced.
The only thing you have to look with this kit is, that the block must be decked to 8.19″ to get a good running engine.
The heads are trick flow.
The cam is a speed pro rollercam with the duration and lift like the trick flow stage 1 cam.
Steel rollerrockers from cat and so on.
The whole mix is a compromise between the money and the power, but for the tiger it is realllllllllllly enough.
Weiand stealth intake, 600 Holley (I think the best would be a 670 Street avenger from holley. The 600 is a little small, but the fueleconomy is okay)

regards
Hans