Reply To: Block interchange/modification questions.

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

July 8, 2005 at 6:41 pm #59462

tiger331

Hello,

you must not cut anything on your tiger!
You need another bracket for the clutch slave-cylinder.
You must trill new holes in the bellhousing to fit your gearbox (if you have the narrowrange MK1 box) and you need a ring to fix the gearbox in the middle of the bellhousing (easy to make).
Take your old frontcover and everything is fine.
If you use a fordmotorsport balancer you must look if he does not drag at the frontcover, in my case I could modify the frontcover to make space for the balancer.

regards
Hans