The problem was with the PCV valve. I tried using a baffled grommet but it still sucked oil into the intake and smoked like crazy. I tried a variety of elbows, grommets, etc. and it just kept coming. It probably was a case of the hole for the PCV valve being right over one of the rockers and the roller rockers slopping oil around a bit differently than the stock rockers would have. The cover with the PCV valve came with no hole and I probably should have taken more time in choosing the site for the hole I drilled (Like between two rockers). I also had problems with oil seeping out around the oil filler cap. The baffled rockers solved all of these problems. I still had to dent the baffles a little for clearance.
Over 13″ of rain in Jacksonville in the past week. this morning, Sunshine. This afternoon, more rain.