Re: Gas line "T" fitting – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

July 22, 2013 at 4:45 pm #65256

Michael Hartman and Donna Bissey

Participant

Wayne,

Thank you very much for the information. That will help greatly during the install.

The replacement part from Sunbeam Specialties is the plastic nylon version. Interestingly, it came with two hose clamps. The original nylon T fitting on the car did not have any clamps. I assume these clamps are to be used to compress the nylon onto the carburetor nipples. The part came without instructions and the gentleman at Sunbeam Specialties has never installed the part.

A photo of the part and clamps is here:
http://mhartman.net/photos/Sunbeam/IMG_3211_gas_line_T_fitting.JPG

Thanks again,
Mike