Originally the directional on LHD cars was fitted on the right. This was a holdover from the Alpine design where the overdrive switch would be fitted to the left side so that it could be operated with the hand not occupied with shifting. As Eric said, you can swap sides easily enough by removing the cowl, moving the blanking plug to the other side androtating the switch.
Forums
All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below 