TORQUE LOADING FIGURES
ENGINE
Cylinder head (tighten when cold)		48 lbs. ft.	(6.6 kg.m)
Crankshaft (mains)		55 lbs. ft.	(7.6 kg.m)
Con. rod (big-end)	Series I Alpine, Series III Rapier	20 lbs. ft.	(2.7 kg. m)
	Alpine, II Series Rapier IIIA Onwards	24 lbs. ft.	(3.3 kg. m)
Flywheel		40 lbs. ft.	(5.5 kg. m)
GEARBOX
Mainshaft nuts		80 lbs. ft.	(11.0 kg.m)
REAR AXLE
Hypold bevel pinion nut		110 lbs. ft.	(15.2 kg.m)
Axle shaft		180 lbs. ft.	(24.8 kg.m)
PROPELLER SHAFT
Universal joint-metal to rubber (where fitted)		50 lbs. ft.	(6.9 kg.m)
FRONT SUSPENSION
Fulcrum pin to crossmember mounting bolts (upper)		48 lbs. ft.	(6.6 kg.m)
Fulcrum pin to crossmember mounting bolts (lower)		32 lbs. ft.	(4.4 kg.m)
Eye bolt-trunnion to link		40 lbs. ft.	(5.5 kg.m)
		85 lbs. ft.	(11.7 kg.)
Ball pin-stub carrier to link		52 lbs. ft.	(7.1 kg.m)
Ball pin-housing to link		33 lbs. ft.	(4.5 kg.m)
Shock absorber to spring pan		6 lbs. ft.	(.8 kg.m)
Crossmember to frame		62 lbs. ft.	(8.5 kg.m)
Road wheel nut		48 lbs. ft	(6.6 kg. m)
REAR SUSPENSION
Rear spring "U" bolts	Alpine	42 lbs. ft.	(5.8 kg.m)
	Rapier	16 lbs. ft.	(2.2 kg.m)
STEERING
Box to frame		30 lbs. ft.	(4.1 kg.m)
Relay lever to frame		30 lbs. ft.	(4.1 kg.m)
Steering crosstube ball pin	centre	30 lbs. ft.	(4.1 kg.m)
	outer	28 lbs. ft.	(3.8 kg. m)
BRAKES
Brake disc to hub		38 lbs. ft.	(5.2 kg.m)
Caliper to adaptor		52 lbs. ft.	(7.1 kg.m)
Steering arm to carrier and adaptor		38 lbs. ft.	(5.2 kg.m)
		60 lbs. ft.	(8.2 kg.m)
Adaptor to carrier		38 lbs. ft.	(5.2 kg.m)
Bleed screws		6 lbs. ft.	(.8 kg.m)
Union nuts	(male)	7 lbs. ft.	(.9 kg.m)
	(female)	9 lbs. ft.	(1.2 kg.m)
Backplate to casing		17 lbs. ft.	(2.0 kg.m)
Wheel cylinder to backplate		12 lbs. ft.	(1.6 kg.m)