Alpine 2.8 Cologne (FORD) V6 Conversion Components for your driving pleasure

Post information regarding the modification of Alpines.
Tiger2Dan
Silver
Silver
Posts: 43
Joined: Fri Jun 29, 2012 11:12 pm
Club Member of TEAE?: Yes
Membership Number: 3136
Location: Greenwood, SC 29649
Contact:

Alpine 2.8 Cologne (FORD) V6 Conversion Components for your driving pleasure

Postby Tiger2Dan » Wed Jun 13, 2018 11:47 am

If you review some of the "other" POSTS on the 2.8 V6 Conversions you will find that I am offering components for a full range of items.

I designed "STRAIGHT-Back" Headers similar to the Tiger system, mine do not "stick out" the side of the car!

My engine mounts are much more stable than others being offered, they are designed to serve as a "block" to keep the engine from moving too far toward the front of the car when making the initial installation. They come with a "rubber biscuit" that is readily available from multiple Auto Suppliers.

My transmission brackets are designed for both transmission types, either the Manual 4 spd or the BW35 Auto Alpines. These Transmission brackets are applicable for the late model Mustang T5's; C3/4 and A4LD Automatic transmissions.

A key to my offer is that you can purchase any one "single" item or multiples of my components.

For a full range of components available please go to: danr.mhartman.net or or E-mail: tiger2dan@gmail.com
DanR

Love them Sunbeam's - So Keep'em-on-the-Road
http://danr.mhartman.net

Return to “Modified Alpine”

Who is online

Users browsing this forum: No registered users and 2 guests